Technical data：

• Working width / Gauge：

3454 mm = 136″  

E18, E22, E24, E28

• Knock-over comb bar distance：

4D-KNIT, 1.5-5 mm, continuously adjust able. Central trick plate distance readjustment

• Bars / knitting elements：

3 ground guide bars, 3 Group Piezo Jacquard guide bar (split execution);

Two individual latch needle bars, two knock-over comb bars, two stitch comb bars

• Warp beam support：

3 × 812 mm = 32″ (free-standing)

Option: 6 × 812 mm = 32″(free-standing)

• GrandStar®(GrandStar COMMAND SYSTEM)

Operator interface to configure, control and adjust the electronic functionality of the machine

• Yarn Iet-off device

For each completely mounted warp beam position: one electronically controlled yarn Iet-off drive

• Fabric take-up

Electronically regulated fabric take-up, driven by geared motor, consisting of four rollers.

• Batching device

Separate rolling device

• Pattern drive

EL-drive with 9 electronic guide bar drives,

Max. shog distance: 35 mm

• Electrical equipment

Speed-regulated drive, total connected load of the machine: 7.5 KW

Voltage: 380V±10% three-phase power supply, main power cord requirements: not less than 4m㎡ three-phase four-core power cord, ground wire not less than 6m㎡

• Oil supply

Heating and cooling by means of circulating air heat exchanger, filter with dirt-monitoring system

• Equipment working conditions

Temperature 25℃±3℃, humidity 65%±10%

Floor pressure: 2000-4000KG/㎡

Download: GE296J6-3-136 bar position(1)